Skip to content
iTRIT
Back to home page

Pegboard Hooks

COMING SOON

Pegboard mounts for 3D-printed parts – compatible with IKEA SKÅDIS, 10×10 mm square-hole tool panels and 1/4" or 1/8" pegboard.

Pegboard Hooks adds matching hooks and pegs to a selected flat face of a model. The result is shown as a live preview before the geometry is modified. The Fit grid function places the maximum number of mounts on the face, and a calibration coupon helps determine the correct fit for a given printer. The entire operation can be undone in a single step.

Features

  • Four board types: IKEA SKÅDIS compatible, 10×10 mm square holes, 1/4" and 1/8" round-hole pegboard
  • Live preview – mounts extending beyond the face are highlighted in red
  • Fit grid: the largest grid that fits the selected face
  • Grid, staggered or symmetric layout; load-bearing hooks and anti-rotation pegs
  • Calibration coupon for determining the correct fit
  • A single undo step and timeline group for the entire operation
  • Interface in English, Polish, German and Spanish
Supported boards

Four pegboard systems in one add-in

To identify your board, measure one hole and the distance between the centres of two adjacent holes.

IKEA SKÅDIS compatible

5×15 mm slots · 40 mm grid, staggered

Vertical slots in a staggered pattern – columns every 40 mm, rows every 20 mm. Fibreboard, approx. 5 mm thick.

Hook: rectangular peg, tab down

Square holes 10×10

10×10 mm squares · 38 mm grid

Metal tool walls with Euro perforation, 1–2 mm sheet steel. Typical workshop panels from DIY stores.

Hook: rectangular peg, tab down

Pegboard 1/4"

Ø 6.35 mm · 25.4 mm grid · ~6 mm board

Classic US pegboard with round holes every inch. Also metal round-hole panels with this spacing.

Hook: round peg, tab pointing up – inserted at an angle

Pegboard 1/8"

Ø ~4.8 mm · 25.4 mm grid · ~3 mm board

Thin pegboard with holes smaller than 5 mm, approx. 3 mm thick.

Hook: round peg, tab pointing up – inserted at an angle

How it works

  1. 1

    Face selection

    Select the flat face of the model that will rest against the board.

  2. 2

    Board type

    Pitch, layout and hook dimensions are set automatically for the selected system.

  3. 3

    Grid

    Define columns and rows manually or use Fit grid to cover the entire face.

  4. 4

    Preview and creation

    Review the live preview and add the hooks – as a single undo step and timeline group.

Autodesk and Fusion are trademarks of Autodesk, Inc. iTRIT is not affiliated with or endorsed by Autodesk.